Zafira towbar wiring problem

Discussion in 'Zafira' started by lunr, Aug 20, 2005.

  1. lunr

    lunr Guest

    Fitted a towbar to a 1.6 life today. Fitted Vauxhall electrics kit. rear
    indicators on car would not work with nothing connected to socket.
    Thought it out and one drawing shows a left hand drive car. I switched the
    towbar loom around, indicators worked ok but now side light on drivers side
    does not work and brake light on passenger side does not work. Works ok when
    you disconnect towbar loom.
    Any one had simular problem.
     
    lunr, Aug 20, 2005
    #1
  2. lunr

    Gio Guest

    Sorry cannot help. I just purchased a standard relay unit from Towsure
    along with their tow bracket and then ran cables direct to the tail light
    units. One thing I did notice though was that the towball indicator light
    on the dash flashes correctly whenever the trailer socket is in use and you
    are indicating to turn. I can only assume there must be a volt / current
    sensing circuit with the car. I would have expected the VX unit to be a
    simple plug and go affair ?

    Gio
     
    Gio, Aug 21, 2005
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.