wiring new stereo

Discussion in 'General Motoring' started by thelentaylor, Sep 13, 2006.

  1. thelentaylor

    thelentaylor Guest

    someone help me just taken old stereo out and have nt got a clue which
    wires go where on new stereo i have a 1995 1.6 16v sport astra
     
    thelentaylor, Sep 13, 2006
    #1
  2. thelentaylor

    airsmoothed Guest

    Hopefully your new stereo has ISO connectors? like the two light grey
    ones to the left of this photo?

    http://snipurl.com/wejc

    Your Astra should have matching ISO sockets you removed from the back
    of the old radio? If not then they are probably clipped into a 'cage'
    which holds the radio into the car; in which case you need to remove
    the cage - it's usually only held in be a few bent metal tags round the
    edge - and push the ISO sockets out of the back of the cage.

    Identify which socket is for the speakers ( this will have all 8 wires
    fitted) and which is for power ( this will probably not have all 8
    wires fitted). Now life gets slightly complicated, as Vx use a
    different pin-out on the power connector to most people. You will need
    to swap the switched and unswitched live feeds over, or alternatively
    there's probably a maplin / halfords adaptor lead available if you
    don't fancy DIY.

    hope that makes some sense...
     
    airsmoothed, Sep 14, 2006
    #2
  3. thelentaylor

    Desireless Guest

    Just to add to this, I recently swapped over my 1998 Corsa Blaupunkt
    radio: CAR300. - The cage might be the same as mine, in which case you
    need to remove a holding nut at the very back. Fiddly, as is the
    unclicking of any ISO connection that may be there, plus the attenna
    plug, also clicked in to the cage.

    The cage is designed to be bent, pull the top side down and bottom
    side UP until it collapses, then it can easily be removed.

    My Pioneer CD radio had breaks in the yellow/red power cables, so they
    could easily be swapped over. Whether that's the norm, I do not know.
    Doing this cures the problem of the radio not keeping settings, which
    stumped me for a good long time :/

    A new radio won't necessarily come with an adaptor for the antenna,
    but these are only a couple of quid from a good car store. I had to
    remove a plastic plate (2 screws) from the left of the dashboard, just
    inside the footspace, near clutch - to reach in and plug the antenna
    in.
     
    Desireless, Sep 14, 2006
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.