Vectra Dash

Discussion in 'Vectra' started by Steve W..., Feb 25, 2004.

  1. Steve W...

    Steve W... Guest

    Vectra 1.8Glsi 1997
    Noticed this morning that I can no longer see the numbers on my mileage &
    trip meter, tried turning lights on but still no luck. If I look closely I
    can see them just about, I presume their must be some kind of bulb behind
    the display that has probably blown! Has anybody ever replaced bulbs in the
    dash & what's involved or is it best left alone?

    Steve...
     
    Steve W..., Feb 25, 2004
    #1
  2. Steve W...

    Diver Guest

    Yeah there is a bulb, and it sounds as if has gone, however when the same
    situation happened to me I gave the dash a good thump and its been on ever
    since .
     
    Diver, Feb 25, 2004
    #2
  3. Steve W...

    r3duf Guest

    TID. You need the Haynes Manual to see what is involved. A good site for
    info is http://www.vectra-sport.com/. It can be a little bit awkward trying
    to undo some of the screws ect but no pain no gain !!!! Test all your other
    bulbs if you go ahead I found the tenp/petrol not working.
    Regards R3
     
    r3duf, Feb 25, 2004
    #3
  4. Steve W...

    Steve W... Guest

    Thanks for the info, I will have to try & dig out my Haynes manual! I know I
    have one somewhere. I am not so worried about taking out the dash, its just
    the bloody airbag that puts the wind up me.

    Steve...
     
    Steve W..., Feb 25, 2004
    #4
  5. Steve W...

    steve Guest

    you wont have to remove the steering wheel to remove the instrument cluster,
    in fact don't even attempt to, just adjust it so its on its lowest position.
    you may find the speedo cable a bit akward, little hands are helpfull.
     
    steve, Feb 26, 2004
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.