Removing 2007 meriva 1.4 inlet manifold

Discussion in 'Meriva' started by Karl H, Feb 12, 2023.

  1. Karl H

    Karl H

    Joined:
    Feb 12, 2023
    Messages:
    1
    Likes Received:
    0
    Can anyone shed some light on a problem I have. I need to remove the inlet manifold off of my car so that I can remove the head( think/ hope I have a head gasket problem. Trouble is , I’ve followed the Haynes manual and have removed exhaust manifold and various othe bits n pieces but the inlet manifold won’t budge. I’ve unclipped, loosened , removed I think everything the manual tells me to but it just won’t budge. The book says there’s a bracket underneath fixing it to the head but I’ve looked and looked and can’t see one. I’ve got everything else loose but it’s stuck fast. Has anyone got any ideas or tips on what I might be doing wrong. Thanku
     
    Karl H, Feb 12, 2023
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 2.2dti vectra inlet manifold

  2. Update: 2.2Dti inlet manifold

  3. Vectra 2007+ Oil

  4. Zafira b 2007 2.2 direct petrol. low power, very sluggish

  5. I have a leaking exhaust manifold gasket in my 03 omega 16v 2.2Has anyone replaced one themselves.

  6. Help needed Vauxhall zafira 2007

  7. 2007 Astra H Auto box not using all gears

  8. Meriva A 2007 won't start

Loading...