fitting Zafira alarm

Discussion in 'Zafira' started by doug, May 4, 2005.

  1. doug

    doug Guest

    Hi all, I have fitted an alarm to my Zafira Club,which works ok,but I can`t
    find a handy grommet on the bulkhead to run the thin wire from the alarm
    sounder in engine compartment to the dash board for the warning light!
    Seems the car is too well made! Has anyone managed this one,and can
    advise?....Even the bonnet release cable hole is not visible! ...Thanks for
    any advice Regards to all Doug
     
    doug, May 4, 2005
    #1
  2. doug

    me140 Guest

    You could always use a wire that Vauxhall have put in. If you haven't got
    front fog lights the plug will usually still be there and then you can just
    find the other end at the fuse box where the relay would be - top row 4th
    from right 2nd terminal down. Black wire at fog light plug. If you have got
    fog lights find another unused plug under the bonnet and I will let you know
    where it goes. Hope this helps.
     
    me140, May 4, 2005
    #2
  3. doug

    Steve Guest

    When i had a high power stereo fitted the monkies at halfords (yeah, yeah I
    know) they found a place tp run the cable. Open the front door (either of
    them) and you will see a large grommet there, that goes into the cabin
    behind the the footwell trim. then immediatly forward of this is a what I
    can only describe as a seal of some sirt for the front wing. Poke something
    hard but flexible behind that and it should appear I think inside the wing
    where you should be able to grab hold of it through a couple of holes in the
    engine bay. Is that clear? Not got the zafira no more so cant take piccys
    for you, sorry

    Steve
     
    Steve, May 4, 2005
    #3
  4. doug

    doug Guest

    Best regards from Doug.
     
    doug, May 5, 2005
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.