Fitting Reversing Sensor on Vectra

Been thinking of fitting Reversing sensor to my Vectra
Don't really want the one with display just the one that beeps as you
come in to proximity with something as you reverse
has anybody fitted one of these? any recommendations
or advice please
regards
Gordon

 

I fitted one on my Omega, and it was pretty easy. The stick on sensors
squeezed into the gap either side of the number plate, then I just had
to run the sensor leads to the electronics box, and wire to earth and
the reversing light circuit.
I bought the same system for my Signum, but then found that it was
easier to fit a flush type sensor, so I've got a duel sensor surface
mount system for sale -see www.motormania.co.uk for details of the
system.
Cheers, Phil

 

Hi, i got a reversing sensor from "Woolworths" for just over £10 fitted in
about 20 mins, you get 2 sensors and control box which as indicator lights
and bleeper, 2 wires to connect to reversing lights wires and powers from
them. works well on my cavy, so should be the same on the vectra.

hopes this helps

Ian (",)